Shop

Showing all 9 results

  • Fully loaded with a variety of accessories.

    6061 Eyepiece Turret

    £1,995.00

    The nPAE 6061 Turret is nPAE’s mid range eyepiece turret. Set up your eyepieces, cameras, spectrometers, etc when you first start your nights viewings then all you need to do is spin the turret and you can quickly switch between them.

    Cut using 5-axis CNC milling from solid blocks of aircraft grade 6061 aluminium this turret will hold 3 x 1.25″ eyepieces and 3 x 2″ eyepieces using nPAE custom built parfocal Maia locks. The internal 1/10th wave BK7 mirror diagonal ensures superior optical performance even at high magnification.

    With a slot at the nose for a single 2 inch filter you can apply the filter to all your accessories and if you need to switch it out during the night you need only lift it free and replace it. The turret comes with 1 filter holder, additional holders are available here.

    For our initial launch the 6061 Turret is supplied with a FREE Cerberus carry case.

    Instruction Manual can be found here


  • nPAE Carbon Fiber Pen

    Carbon Fiber Pen

    £8.00

    With the nPAE Carbon Fiber pen you’ll be light years in front ! This slick roller ball is wrapped in polished carbon fiber. A must for all executives.


  • Cerberus Case

    Cerberus Case

    £85.00

    If you’re searching for a tough case to protect your astronomy or camera equipment, the nPAE Cerberus Case is just what you’re looking for. It’s crush resistant, dust resistant, impact resistant and water tight to 1m ! The Cerberus Case is rated at IP67 and IK-08. The interior is packed with cubed foam so you can customise the cavity to fit your own equipment and the inside lid is fitted with an egg box shaped foam insert. The outside has two courtesy lock holes on each side of the front and integral standing feet on the back side. The pressure release valve for flying, name card window and huge 60kg carrying capacity complete the extensive specification.

     


  • Large Red LED Torch

    Large Red LED Torch

    £25.00

    The nPAE red LED torch has a solid aluminium body and a massive 51 individual red LED’s. It’s red light will not ruin your night vision. Thanks to those 51 LEDs it’s perfect for illuminating large areas such as an observatory, a whole set up area or finding your way to and from your pitch and the pub.

    Available in stylish black with a silver lasered on nPAE logo this single button operated torch come supplied with 3 AA batteries.


  • 3 filter holders

    Pack of three 2 Inch Filter holders

    £54.00

    A set of three 2″ filter holders for use with our eyepiece turret. Using M48x0.75 thread they can take filters upto a thickness of 10mm.


  • Small Red LED Torch

    Small Red LED Torch

    £10.00

    The nPAE small red LED torch has a solid aluminium body and 9 individual red LED’s. It’s soft red light will not ruin your night vision and is perfect for illuminating small areas such as where your telescope is set up. Available in stylish black with a silver lasered on nPAE logo this single button operated torch come supplied with 3 AAA batteries.


  • Angled render of small turret

    Small Telescope Turret

    £995.00

    *Product still in development and subject to change* The nPAE Small Turret is nPAE’s eyepiece turret intended for use on telescopes from 6-9 inches. The rotating bezel is manufactured from injection molded Nylon to provide a strong and stiff construction.  This turret will hold 6 x 1.25″ eyepieces. The internal 1/10th wave BK7 mirror diagonal ensures high end optical performance.

    Set up your eyepieces, cameras, spectrometers or other equipment when you first start your nights viewings, then all you need to do is spin the turret and you can quickly switch between them.

    The 2 inch nose is threaded to take a single filter which is then applied to whatever you are looking through.


  • Rendering of the standalone Filter Changer.

    Theia Filter Changer

    £70.00£106.00

    *Product still in development.Pricing and specification subject to change* The Theia Filter changer is a smaller alternative to a filter wheel. By loading up your filters in advance into our quick change filter holders you can quickly change from one to the other. Using high power magnets to hold the filters in place you can meridian flip the telescope and not drop the filters. When you want to change you simply pull the filter out and replace it. Thinner than a filter wheel the Theia filter holder takes up less back focus. Supplied with 3-6 filter holders. Additional holders can be purchased here:

    http://www.npae.net/product/pack-of-three-2-inch-filter-holders/


  • Theia90 Isometric

    Theia90 Combination Diagonal & filter changer

    *Product still in development. Pricing and specification subject to change* The Theia90 Filter changer is a combination diagonal and filter changer. By loading up your filters in advance into our quick change filter holders you can quickly change from one to the other. Using high power magnets to hold the filters in place you can meridian flip the telescope and not drop the filters. When you want to change you simply pull the filter out and replace it. The diagonal uses a 46mm minor axis mirror with 1/10th wave finish. The unit comes in a sturdy mini cerberus case which is just a tough as its larger brother. Supplied with 3-6 filter holders. Additional holders can be purchased here:

    http://www.npae.net/product/pack-of-three-2-inch-filter-holders/